######################################################################
#
#      MosChip USB Compound Device driver installation notes
#
######################################################################


===================================
 Windows98SE/ME Driver Installation
===================================

This document will present the steps needed to install or update the Drivers 
for MosChip USB Compound Device products, or another manufacturers product 
based on a MosChip USB Compound Device.

For this example, the MCS7715 was used as the test case.
This device offers One Serial Port, and one IEEE-1284 style Parallel Port.



1. Installing Drivers for the first time.
------------------------------------------

    a. Turn the computer ON.

    b. Plug-in the USB compound device to the one of the USB port.
	
    c. Windows should detect the new USB device, and automatically 
       invoke the "Add New Hardware wizard".

    d. Press "Next" to start the installation.

    e. At the dialog box which says 
	i) Select "Search for the best driver for your device (recommended)".
	ii) Click "Next" to continue.

    f. At the next dialog, specify where Windows should look for the files.
	i) Select "CDROM drives" if this is where your Driver files, 
           otherwise select "Specify a location". Select the location of the new Driver files.
	ii) Click "Next" to continue.
	iii) At the next dialog
	iv) Click "Next" to continue.
	v) At the next dialog which says "MosChip USB Compound Device"
	vi) Click "Finish" to continue.

    g. Windows should automatically invoke the "Add New Hardware wizard".
	
    h. Press "Next" to start the installation.

    i. At the dialog box which says 
	i) Select "Search for the best driver for your device (recommended)".
	ii) Click "Next" to continue.

    j. At the next dialog, specify where Windows should look for the files.
	i) Select "CDROM drives" if this is where your Driver files, 
           otherwise select "Specify a location". Select the location of the new Driver files.

	ii) Click "Next" to continue.
	iii) At the next dialog
	iv) Click "Next" to continue.
	v) At the next dialog which says "USB-to-Serial Port Driver"
	vi) Click "Finish" to continue.


    k. Windows should display additional dialog boxes saying it has found new hardware,
       and is installing the appropriate software to handle the new devices. These steps 
           should proceed without any additional input from you.

    l. When the Windows desktop is displayed, the Driver installation is complete.




2. Check Driver Installation.
------------------------------

    a. Open the Windows Device Manager
	i) Right-Click the "My Computer" icon on the Desktop.
	ii) Select "Properties" from the drop-down menu.
	iv) Click the Device Manager tab to show the current Hardware list.

    b. Confirm that the New Hardware has been included
	i) "MosChip USB Compound Device" is in the Universal Serial Bus Controllers. 
	ii) "MosChip USB Serial COMn"  in Ports (LPT & COM) categery 
	ii) "MosChip USB Parallel LPTn"  in  Ports (LPT & COM) categery 
	iii) In our case, one  Serial Port and one Parallel Ports were added.



3. Removing Previously Installed Drivers
-----------------------------------------

Sometimes it will be desirable or even necessary to remove the previously installed 
drivers, so that a new, clean installation can be performed. Drivers can get 
corrupted when being written to their installation medium (CD-ROM etc.). If this 
happens, the drivers may not install properly.Even if the installation proceeds 
without errors, the drivers may not work. Sometimes older outdated drivers are 
shipped with a product. Newer machines may require newer updated drivers, but the 
older drivers prevent them from being installed. The easiest way to remove old 
drivers is to use the MosUnst.EXE program (located in WINDOWS\System 
directory or in the Installation disk supplied with the product). 


Using MosUnst.EXE to remove old Drivers

    a. Unplug the USB Compound device. 

    b. Open Start->Settings->ControlPanel->Add/Remove Programs.

    c. Select "MosChip USB Compound Device" click Add/remove. 	    

    d. At the next dialog, Click "OK" button. 

    e. Then click "RebootNow" button to reboot the system. 





###############################
END OF THE INSTALLATION NOTES
###############################